Brown Cloak

1. Basecoat with Rhinox Hide .
2. Glaze and run Nuln Oil into recesses for the shading. The neutral grey cloth I painted later is shaded in the same way, you may want to shade both at the same time for the sake of efficiency.
3. Gradually mix Steel Legion Drab into your :rhinox hide and build up highlights. I did this in a couple of passes applying the highlights in a series of scratchy lines, coverring a smaller area as the paint got brighter.
4. Apply crispy edge highlights of Steel Legion Drab all over the cloak, making them a little thicker on curves and corners.
5. Selectively highlight with Baneblade Brown on corners and curves.
6. Mix a little White into your Baneblade Brown apply small/specular highlights within the last stages highlights.

Fur Trim

1. Basecoat with Steel Legion Drab .
2. Give an all over wash of Agrax Earthshade .
3. Edge highlight the strands with Karak Stone .
4. Selectively edge highlight with Pale Sand , where the fur would most catch the light.

Neutral Grey Cloth

1. Basecoat with Skavenblight Dinge .
2. Glaze and run Nuln Oil into recesses for the shading.
3. Glaze highlights with Dawnstone towards edges and raised details.
4. Edge highlight everything that is accessible with fine lines of Administratum Grey .
5. Mix a little White into the Administratum Grey and selectively highlight.
6. Finish with a few specular highlights of White .

Warm Grey Trousers

1. Basecoat with Skavenblight Dinge .
2. Wash with Targor Rageshade .
3. Glaze highlights with Stormvermin Fur towards edges and raised details, then edge highlight everything.
4. Selectively highlight edges on curves and corners with Karak Stone .
5. Mix a little White into the Karak Stone and add a few small and specular highlights within the pervious stage, to add texture.

Tabbard

1. Basecoat with Karak Stone .
2. Shade with some thin Steel Legion Drab .
3. Enhance the previous stages highlighting with thin lines of Rhinox Hide in deep recesses.
4. Edge highlight with 1:1 Karak Stone and White .
5. Finish with a few small/specular White highlights.

Bandages

1. Basecoat with Steel Legion Drab .
2. Shade recesses with some thinned Rhinox Hide .
3. Glaze raised areas with Karak Stone , dragging your brush towards the most exposed part, to help build highlights.
4. Edge highlight wrappings with Ushabti Bone .
5. More selectively highlight with Screaming Skull .
6. Mix some White into your Screaming Skull and highlight a little smaller.

Dark Brown Leather

1. Basecoat with Rhinox Hide .
2. Add chunky highlights of Doombull Brown .
3. Add fine highlights of Mournfang Brown .
4. Selectively highlight with XV-88 .
5. Mix some White into the XV-88 and finish with specular highlights.

Skin

1. Basecoat with an equal parts mix of Cadian Fleshtone , Kislev Flesh and White .
2. Mix some Doombull Brown into the basecoat and glaze in some shading.
3. Increase the amount of Doombull Brown in the mix and shade the deepest recesses.
4. Mix some White into the base colour and highlight the skin.
5. Increase the amount of White in the mix for further highlights, pushing them as far as you need.

Wood

1. Basecoat with 1:1 Dryad Bark & Mournfang Brown .
2. Run some thin Dryad Bark into deep recesses.
3. Apply chunky highlights with a 1:1 mix of the base colour & Karak Stone .
4. Now apply fine highlights with Karak Stone .
5. Finish with selective highlights of 1:1 Karak Stone & Wraithbone .

Steel

1. Basecoat with Exhaust Manifold .
2. Wash with Nuln Oil . Adding glazes of Agrax Earthshade towards deep recesses, and where more interest is needed.
3. Highlight with mix some Silver RLM01 Metallic into the Exhaust Manifold and highlight. Do this roughly, with a mix of edge highlights and a few stippled marks.
4. Finish with some small Silver RLM01 Metallic highlights.